Frisco Concrete Lifting logoFrisco Concrete LiftingFrisco, TX
Driveway Leveling photo

Frisco Concrete Lifting

Driveway Leveling in Frisco, TX

Driveway leveling for sunken or cracked slabs in Frisco, TX. Foam or mudjacking rated for vehicle loads. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Frisco and nearby communities.

Driveway leveling raises a sunken slab back to grade so cars, trip hazards, and drainage problems get fixed without a full tear-out. Frisco Concrete Lifting handles this often, since fast-built subdivisions here poured driveways on fill soil that settles unevenly within the first few years.

New-construction driveways cracking or sinking early isn't unusual in a fast-growth market. It's typically the fill compacting under the slab, not a defect in the concrete itself, and it's fixable with a targeted lift rather than replacement.

What's included

What's included with Driveway Leveling

Typically included: - Optional: Customer prep:

  • Full driveway inspection to map every low panel — Injection sized to vehicle-load slabs, not just foot traffic -.
  • Joint resealing where panels meet — Hole patching finished to match the surrounding surface.
  • Crack sealing if the driveway has surface cracking beyond the settling
  • Extra injection points for multi-panel driveways with several low spots
  • Move vehicles off the driveway before the appointment
  • Clear planters or basketball hoops near the work area

How it works

How our Driveway Leveling process works

  1. Drilling access points photo
    Step 1

    Inspection

    Walk the full driveway, mark every low panel.

  2. Lot assessment photo
    Step 2

    Void assessment

    Check depth and soil condition under each spot.

  3. Drilling injection holes photo
    Step 3

    Drilling injection holes

    Placed at low points across the slab.

  4. Material injection photo
    Step 4

    Material injection

    Foam or slurry chosen for vehicle load.

  5. Lift and level check photo
    Step 5

    Lift and level check

    Straightedge confirms an even rise.

  6. Hole patching photo
    Step 6

    Hole patching

    Holes filled and finished flush.

  7. Cure time photo
    Step 7

    Cure time

    Material sets before vehicle traffic returns.

  8. Final walk-through
    Step 8

    Final walk-through

    Homeowner checks the driveway before we leave.

FAQs

Driveway Leveling FAQs

How long does a driveway leveling job actually take?

Most single-driveway jobs finish in a single visit, usually a few hours depending on how many panels need lifting. Drive-on time follows the material's cure window, which we'll confirm on-site.

Why is my new construction driveway already cracking or sinking?

Fast-built subdivisions pour driveways on fill soil that hasn't fully compacted yet. As that fill settles unevenly over the first few years, one panel can drop while the rest stay put.

Is it cheaper to raise concrete or replace it?

Raising an existing driveway slab is almost always less expensive than tearing it out and repouring, since you skip demolition and disposal costs entirely.

Do I need a permit for driveway leveling?

Lifting an existing driveway is a repair, not new construction, so it typically doesn't require a permit. Confirm with your city if your driveway sits close to a right-of-way.

What if only part of the driveway is sinking?

That's common. We inject only at the low points, so you're not paying to lift sections that are already level.

When to call

When to call for Driveway Leveling

Call Frisco Concrete Lifting or request a free estimate before a small dip turns into a bigger repair.

  • A trip hazard has formed at a panel joint
  • Water pools toward the house instead of draining away
  • One corner of the driveway has visibly dropped
  • A crack has widened enough to catch a tire edge

Before & after

Before and after Driveway Leveling results

  • Driveway Leveling photo
    Before
  • Driveway Leveling photo
    After

Ask about Driveway Leveling

Tell us about the project and how to reach you.

Call (936) 261-7046